CMCP585 Eccentricity Transmitter

The CMCP585 Eccentricity Transmitters are compatible with proximity probe inputs, they provide a 4-20 mA output proportional to the overall measurement. Each unit provides power for the associated transducer, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user specified range such as 0-10 mils. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

When specified with optional alarm feature, the unit functions as a complete single channel monitor that includes alert and danger alarms, and output relays.

Alarms relays and trip multiply are available with the Monitor version.

Alarms – The CMCP500A Series Monitors have two independent set points, with LED alarm indicators and output relay contacts (Alert and Danger). Set points are adjustable via potentiometer, from 0 to 110% of full scale. Each has an adjustable delay of 1 to 10 seconds. SPST Relay contacts are rated 5 Amps @ 30 Vdc or 250 Vac for resistive loads. Relay contacts can be independently configured by the user for either Normally Open (NO) (Standard) or Normally Closed (NC) operation. Relays are normally de-energized and can be configured for latching or non-latching (standard) operation. Latched alarms may be reset locally or by remote contact closure. Trip Multiply – The monitors have set point multiplication of 3X via contact closure (2X available). To avoid tripping the alarms during machine start-up.

Electrical
Power:+24 Vdc @ 45 mA max. (30 mA typical at 2 full scale output). Reverse polarity and transient protection included
Frequency Response (wo/filters): 30 cpm to 300 cpm
Buffered Output: BNC Connector
Accuracy: 0.5 % of Full Scale Range
Output: 4-20 mA proportional to the full scale range.
Maximum Load: 600 Ohms Resistive
Case: Isolated.